Movement bead PVC CO-extruded
The profile is used for finishing thermodynamic joints in ETICS . It is used as a covering profile for zones of displacement and tension (shrinkage-bending or shrinkage-compression) of two different bearing structures.
|Profile type||Length, m||Quantity per pack|
|Other profile sizes are available on request|
|Packaging: cardboard box|
Groove bead is used for designing of decorative groove on the facades of buildings without additional reinforcement with facade fiberglass mesh.
A profile is used as a starting support lath for heat-insulating boards in ETICS. It’s installed horizontally along the perimeter of the building with a special hardware kit (dowel, connector, compensator). The profile takes the load of insulation boards, provides the removal of moisture from the system. Plastering of the hard-to-reach lower edge insulation is not required.