Production and packaging

+7 (4812) 38-16-97 / 38-45-92
30-23-23 / 8 (800) 201-09-79

Plaster profiles for thermal insulation systems /ETICS/

Our products
Catalogue

Reinforced profiles and façade meshes

Corner bead PVC with mesh Reveal bead PVC STANDART Reveal bead PVC with mesh STANDRAT Reveal bead PVC with soft-lip with mesh Reveal bead PVC with soft-lip Reveal bead PVC REINFORCED Reveal bead PVC REINFORCED with mesh Dripnose bead universal PVC with mesh Flexible corner tape PVC with mesh Corner bead for arches with mesh Reveal bead with mesh and precompressed sealing tape Groove bead Movement bead PVC CO-extruded Base profile PVC for thermal insulation Base profile ALUMINIUM for thermal insulation Fiberglassmesh MASTER 160 – 165 g Fiberglassmesh MASTER Panzer 330 g Fiberglassmesh MASTER Interior 65 g PVC Arch Corner Bead PVC corner bead PVC corner bead GENIUS Render stop bead PVC with mesh
Description:

The profile is used for reinforcement and alignment of a plaster layer of vertical and horizontal external and internal angular zones on facades of buildings, including the installation of thermal insulation system of plaster type. It can be used for internal plastering. See mount assembly


Description:

The profile is used for finishing slopes inside and on building facades, including when installing the plaster type thermal insulation system, and is intended for high-quality sealing and sealing of the installation seams of window and door structures. See mount assembly


Description:

The profile is used for finishing slopes indoors and on the facades of buildings including the installation of thermal insulation system of plaster type (ETICS) , and is designed for high-quality sealing and hermetization of assembly joint of window and door structures. See mount assembly


Description:

The profile is used for finishing slopes indoors and on the facades of buildings including the installation of plaster type thermal insulation system and is designed for high-quality sealing and hermetization of the assembly joints of window and door structures. See mount assembly


Description:

The bead is used for reveal finishing indoors and on facades of buildings, including the installation of thermal insulation system of plaster type (ETICS), and is designed for high quality sealing and waterproofing of joints in window and door structures. See mount assembly


Description:

The profile is used for finishing slopes indoors and on the facades of buildings including the installation of thermal insulation system of plaster type and is designed for high-quality sealing and hermetization of joints of window and door structures. When finishing slopes up to a width of 15 cm the profile can be applied without […]


Description:

The profile is used for finishing slopes indoors and on the facades of buildings including the installation of plaster type thermal insulation system and is designed for high-quality sealing and hermetization of joints of window and door structures See mount assembly


Description:

The profile is used for reinforcement and alignment of the plaster layer of the external horizontal angles on the facades of buildings during the installation of the plaster type thermal insulation system (for example, above window and door openings, on boxes for roller shutters, load-bearing balconies, grounds, window slopes, non-plaster-form ground connections, etc.). See mount […]


Description:

Profile is used for the reinforcement of non-standard internal and external angles of varying degrees on the facades of buildings, including when installing plaster type thermal insulation system. It can be applied when performing internal plastering. See mount assembly


Description:

Profile is used for the reinforcement of the plaster layer of the outer corners of arched openings and other curvilinear structures on the facades of buildings, including when installing plaster type heat insulation system. It can be applied when performing internal plastering. See mount assembly


Description:

The profile is used for qualitative adjunction and completion of a plaster layer to a window sill. Windowsill plater form protects the assembly joint from external weather conditions, retains thermal insulation function and helps to reduce heat loss. See mount assembly


Description:

Groove bead is used for designing of decorative groove on the facades of buildings without additional reinforcement with facade fiberglass mesh. See mount assembly


Description:

The profile is used for finishing thermodynamic joints in ETICS . It is used as a covering profile for zones of displacement and tension (shrinkage-bending or shrinkage-compression) of two different bearing structures. See mount assembly


Description:

A profile is used as a starting support lath for heat-insulating boards in ETICS. It’s installed horizontally along the perimeter of the building with a special hardware kit (dowel, connector, compensator). The profile takes the load of insulation boards, provides the removal of moisture from the system. Plastering of the hard-to-reach lower edge insulation is […]


Description:

A profile used as a starting support lath for heat-insulating boards in ETICS. It’s installed horizontally along the perimeter of the building with a special hardware kit (dowel, connector, compensator). The profile takes the load of insulation boards, provides the removal of moisture from the system. Plastering of the hard-to-reach lower edge insulation is not […]


Description:

A facade reinforcement alkali-resistant mesh MASTER is a fiberglass mesh in woven form. It’s sized with polymeric composition to protect the glass fibers from alkaline corrosion and is designed for external and interior plastering (according to GOST R 55225-2012 Reinforcing Alkali-resistant Meshes of Glass Fibre for Building Faces).  


Description:

Tubular plaster mesh MASTER is produced from glass thread and fiberglass rovings in cross weave with 4 mm cell size and 10-110 cm width.    


Description:

An interior mesh MASTER is used for internal plastering work when increased strength is required of the plaster and filler coats on the walls and ceilings.


Description:

A profile is used in interior painting to create arched and other curved constructions. The profile may be employed as a separate item on building faces only with the subsequent wrapping in alkali-resistant fiberglass mesh with a density of at least 160 g/sq. m . See mount assembly


Description:

The profile is used to for further processing in the production of corner constructions with reinforcement mesh, as well as during internal painting works. The profile may be employed as a separate item on building faces only with the subsequent wrapping in alkali-resistant fiberglass mesh with a density of at least 160 g/sq. m . […]


Description:

A profile is used for internal painting work. The profile may be employed as a separate item on building faces only with the subsequent wrapping in alkali-resistant fiberglass mesh with a density of at least 160 g/sq. m . See mount assembly


Description:

The profile is designed for: high quality completion, levelling and reinforcement of the base plaster layer where it adjoints dissimilar surfaces; visual color and structure differentiation between decorative plaster coatings; creation of contraction joints; cutting the plaster coating off in the facade basement; joining the plaster coating with the plancer, including roof sheathing. The profile […]


Our partners
Read more
Dealer network
Read more
Professional advice
Our Manager will
contact you within 2 hours
Write or call us +7 (4812) 38-16-97