Reveal bead PVC with soft-lip with mesh
The profile is used for finishing slopes indoors and on the facades of buildings including the installation of plaster type thermal insulation system and is designed for high-quality sealing and hermetization of the assembly joints of window and door structures.
See mount assembly
|Size of mesh, cm||Width, m||Length, m||Quantity per pack|
|6||10 – 12,5||2,4||72|
|9||10 – 12,5||2,4||72|
|Other profile sizes are available on request|
|Packaging: cardboard box|
- perfectly smooth application of plaster on the perimeter of the slope serves as lath for wall alignment
- quick and economical option for sealing and hermetization of the assembly joint
- deformation tape prevents cracks between the plaster and the window / door unit
- to protect the field joint from external weather influences and vapor from inside the premises
- to keep the thermal insulationfunction of the assembly joint in order to reduce heat loss
- to provide reliable protection of the window or door structure from mechanical damage and contamination during finishing works
- to provide aesthetic connection of plaster to the window / door frame
- additional treatment of joints with sealants is not required
- to reduce the time for finishing slopes in 2 times
- made of impact-resistant, weather-and alkali-resistant polyvinyl chloride (PVC), has a protective strip, self-adhesive moisture-insulating seal and a beacon shelf
- a sealant is fitted with additional protection (thermoplastic elastomer – dust guard)
Профиль применяется для отделки откосов внутри помещений и на фасадах зданий, в т.ч. при монтаже системы теплоизоляции штукатурного типа (СФТК), и предназначен для качественного уплотнения и герметизации монтажных швов оконных и дверных конструкций.
The profile is used for finishing slopes indoors and on the facades of buildings including the installation of thermal insulation system of plaster type and is designed for high-quality sealing and hermetization of joints of window and door structures. When finishing slopes up to a width of 15 cm the profile can be applied without reinforcement mesh by overlapping the mesh angle profile perforated on the shelf of the adjacent profile.