Fiberglassmesh MASTER Interior 65 g
An interior mesh MASTER is used for internal plastering work when increased strength is required of the plaster and filler coats on the walls and ceilings (according to GOST R 55225-2017 Reinforcing Alkali-resistant Meshes of Glass Fibre for Building Faces)..
|Cell, mm||Density, g/sq. m||Tensile strength, H/5 (base/weft)||Roll, sq. m|
|2 х 2||65||–||50|
Interior fiberglass mesh:
- has high resistance to tearing and stretching;
- contributes to overcoming internal stresses caused by sudden changes in temperature and humidity;
- is highly resistant to alkaline components even in conditions of high humidity, due to special polymer processing;
- protects the plaster layer surface from cracking under all climatic conditions.
The products have all the necessary approval documentation for its employment in construction activities in the Russian Federation
Tubular plaster MASTER mesh is produced from glass thread and fiberglass rovings in cross weave with 4 mm cell size and 10-110 cm width.
A profile is used in interior painting to create arched and other curved constructions. The profile may be employed as a separate item on building faces only with the subsequent wrapping in alkali-resistant fiberglass mesh with a density of at least 160 g/sq. m .